Writer： admin Time：2023-11-27 20:56 Browse：℃
| Item | H05VV-F 3X1.0mm2 | ||||||||||||
| Rating temp and voltage | 70℃ 300/500V | ||||||||||||
| Insulation Resistance | ≥ 0.01 M OHM/KM/70℃ | ||||||||||||
| Conductor Resistance | ≤ 19.5 Ω/Km/20℃ | ||||||||||||
| Dielectric Strength | (for cond to others cond) AC 3.0 KV/5 min ( no breaken) | ||||||||||||
| (for cond to water) AC 3.5 KV/5 min(no breaken) | |||||||||||||
| Spark test | 5KV | ||||||||||||
| Insulation | Unaged | Tensile strength | ≥10 N/mm2 | ||||||||||
| Elongation | ≥150 | ||||||||||||
| Aged | Tensile strength | Min.75% of Unaged value | |||||||||||
| Elongation | Min.65% of Unaged value | ||||||||||||
| Jacket | Unaged | Tensile strength | ≥10 N/mm2 | ||||||||||
| Elongation | ≥150 | ||||||||||||
| Aged | Tensile strength | Min.75% of Unaged value | |||||||||||
| Elongation | Min.65% of Unaged value | ||||||||||||
| Pressure test at high temp. | Max 75%(75±1 ̊CX504HRS) | ||||||||||||
| Loss of mass test | MAX 2.0mg/cm2 (100±1 ̊C 120HRS) | ||||||||||||
| Flame test ( flame applied 60s) | No effect within 50mm from upper clamp | ||||||||||||
Marking insulation : no marking      Marking jacket : VDE H05VV-F 3G1.0 mm2 NINGBO JIAJIE ELECTRONICS CO., LTD |
|||||||||||||
| STANDERD | VDE0281 | ||||||||||||
|
SIZE mm2 |
Conductor | Insulation thickness（mm） | Jacket thickness(mm) | Overall dia(mm) | |||||||||
| No/Dia | O.D. |
AVG Value |
Mini thick | AVG value | Mini thick | Mini limit | Max limit | ||||||
| 3X1.0 | 32/0.2±0.004 | 2.4 | 0.6 | 0.44 | 0.8 | 0.58 | 7.0±0.2 | ||||||